Project 32 - Clutch issues...

It sounds like all i do is post issue after issue at the moment..... but here we are again with another inherited problem....... We have been battling a clutch issue for a while... troubleshooting why the fluid keeps getting contaminated.... After some hard work ...We found it!

133747_1794692308211_3706870_o_1794692308211.jpg
133703_1794692188208_7265529_o_1794692188208.jpg

The Visible Scaring on the Piston on the master Cylinder!, So.... We knew someone had done an Auto -> Manual Conversion... but found remnants of their Shortcuts.... and lack of knowledge... 

What the above pictures illustrate is that the Clutch master Cylinder & Pedal box have not been aligned right, So when the clutch is depressed its pressing the pinion on a 45 into the master Cylinder causing excess wear... and ... filings being deposited into the Fluid... Behold!!! Shortcuts will rear their ugly heads eventually...

Picked up a new Master Cylinder... and Re-aligned the clutch and we are good!