Project 32 - Ecu & Loom install.

Well.. The fun begins!, We have picked up a premade hotrod loom and have decided to start running this around the car and mounting it. 


Started to use the factory cable harness that was around the bottom of the window and ran up a new bunch to the boot, 

Everything was nice and clean, Tucked away and able to be identified and troubleshooted at a later date, Things are looking up, 

The ECU was now attached to the new loom, and able to be signaled to be turned on.

Whilst we were working on this the Coil pack & Ignition loom was starting to take shape.