Project 32 - ECU install.. part 3

Now that we have no wiring in the car we could begin with doing the install of the ECU into the car, 

We decided to pickup a Microtech X6 igniter pack whilst we were in the process to run our coil side instead of the ECU, 

We started wiring the Link in and had some fun!

20170917_100244.jpg

The Ignitor pack wasnt far behind!

 

20180106_160700.jpg

now that those are all in we followed this up by installing 3 relays and mounted them beside the kick panel on the passengers side, This covered off Ignition, Fuel and the Radiator fans. 

20180106_160654.jpg